Need help?Do you have a question about the Lifeloc FC10 and is the answer not in the manual?
General| Brand | Lifeloc |
|---|---|
| Model | FC10 |
| Category | Test Equipment |
| Language | English |
Detailed illustration and labeling of the FC10 device's front panel components.
Highlights of the FC10's advanced capabilities, including display, calibration, and battery life.
Step-by-step instructions for correctly inserting AA or NiMH batteries into the device.
Procedure for turning the breathalyzer unit on and off, including diagnostic checks.
Guidelines for ensuring subject compliance, preventing mouth alcohol contamination.
Instructions on how to properly attach a mouthpiece to the FC10 sample port.
Explanation of the Automatic, Manual, and Passive test modes available on the FC10.
Details on two auto-test sample acquisition methods: end of breath and precise volume.
Step-by-step guide for performing a standard automatic breath alcohol test.
How to manually trigger a test sample during an automatic test sequence.
Instructions for performing a manual breath test when automatic sampling is not feasible.
Procedure for performing a passive alcohol detection test without a mouthpiece.
Explanation of the breath flow graph and liter measurement shown during a test.
How the device graphs alcohol detection and displays the final test result.
Procedure to access and review the last recorded test results on the FC10.
Instructions on how to safely detach the mouthpiece from the device.
Guide to configuring the preferred sequence of test modes (Auto, Manual, Passive).
Instructions for selecting the breath sample trigger method: End of Breath or Precise Volume.
Understanding the importance and process of calibrating the FC10 for accurate BAC results.
Overview of the two primary methods for calibrating the FC10 device.
How to set the specific BAC standard value for calibration or calibration checks.
Procedure to choose between Dry Gas or Wet Bath calibration methods.
Step-by-step guide for calibrating the FC10 using the wet bath simulator.
Procedure to verify the accuracy of the FC10 after wet bath calibration.
Instructions for connecting and preparing the dry gas tank for calibration.
Step-by-step guide for calibrating the FC10 using a dry gas standard.
Procedure to verify the accuracy of the FC10 after dry gas calibration.
Guidance on maintaining the fuel cell sensor for optimal performance and longevity.
Instructions on how to clean the exterior of the FC10 unit.
Information on battery types, settings, and expected battery life for the FC10.
Descriptions and explanations for various messages displayed by the FC10 unit.
Information regarding the one-year limited warranty covering parts and labor.
Details on optional extended service plans for additional device coverage.
Information on how to obtain service or repairs for your FC10 unit.
Key operational notices, warnings, and safety information for the FC10 device.
Detailed technical specifications including size, weight, measurement range, and accuracy.
Listing of optional accessories and consumable supplies for the FC10.
To Next Page
