LifeSpan C2 User Manual

Step 2: Rear Base Assembly
Parts Required
Rear Base
Base Frame
Hardware Required
Part # Size Description Quantity
A-1 M10 * 90 Dome Head Allen Screw 2
C-1 M10 Curved Washer 2
1. Locate the hardware bag for Step 2.
2. Place the rear base over the frame aligning the holes in the base with the threaded holes in
the frame.
3. Insert the two 6 mm dome head screws with bent washers into the holes in the front base
and tighten screws.
9

LifeSpan C2 Specifications

General

Brand	LifeSpan
Model	C2
Category	Exercise Bike
Language	English