LifeSpan E-1 User Manual

12
E-1 Exercise Bike
4. COMPUTER OPERATION
PROGRAM PARAMETERS
TIME 00:00-99:59 min:sec
SPEED 0.0-999.9km/h
DISTANCE 0.00-99.99km
ODOMETER (if included) 0-99.99km
PULSE (if included) 0-200bpm
CALORIES (CAL) 0-999.9kcal
KEY FUNCTIONS:
MODE: Select a particular function. Hold the key for 4 seconds to reset all function values except the
ODOMETER (TOTAL).
SET (if included): To input the target value. Excludes ODOMETER (TOTAL)
RESET/CLEAR (if included): Rests target value. Excludes ODOMETER (TOTAL)
OPERATIONAL PROCEDURES:
1. AUTO ON/OFF:
The system turns on when any key is pressed or when it receives a signal input from the speed sensor. The
system turns off automatically when the sensor has no signal input or no key is pressed for approximately 4
minutes.
1. TIME: Records total workout time
2. SPEED: Displays current speed
3. DISTANCE: Records total workout distance
4. CALOURIES: Records calories burnt during workout
5. ODOMETER (if included): Displays total distance accumulated on the machine. Can be rest by replacement
of batteries.
6. SCAN (if included): Automatically cycles through each function

LifeSpan E-1 Specifications

General

Brand	LifeSpan
Model	E-1
Category	Exercise Bike
Language	English