27
Assembling Your Elliptical
B
M4 x 10L Screw
(x2)
5mm Allen
Wrench w/
Phillips
C
M3.5x10L M4x10L
PRE-INSTALLED
M3.5x10L Screw
(x2)
Step 3: Base Assembly (continued)
B. Connect ground wire, small
3-pin, and large 3 pin. Keep
wires in groove to avoid
damage. Tuck wires in
covered space
between rails.
C. Remove 2 pre-installed
screws then attach Base
Connection Cover (3) with
four M4x10L screws (15) and
Phillips head screwdriver.
To Next Page
Loading...
