LifeSpan E2i - Maintenance and Tips

48
Maintenance and Tips
Personal Settings
The E2i and E3i come with the ability for you to personalize several console
settings including:
English or Metric - Used for both Speed and Distance in miles or kilometers
shown on the display.
Calendar - Date and Time are shown on the display readouts, but can be
turned o with this setting. We recommend you keep date and time turned
on to accurately track your results.
Energy Savings - Turn the Energy Saving feature ON or OFF.
Audible Beep - Turns o the audible alert that beeps for speed and incline
changes or when the elliptical is starting or stopping.
WARNING: The audible alert is turned on from the manufacturer to warn the
user that the elliptical is starting or the speed is changing. Turning this alert
o is done at the sole discretion of the user.
Follow the steps below to make changes to the Personal Settings options.
Conguration Steps Information Displayed
Press and hold START and then LEVEL + for 3 seconds
to enter Personal Settings Mode. The rst screen shows
Load Cell Feature. (Do not modify)
Press ENTER to continue
Engineering Mode
10 49
15
17. 7.2014
Press LEVEL + / - to change from English (EN) to Metric
(SI).
Press ENTER to continue.
Select the units
EN or SI
Press LEVEL +/- or to turn Energy Saving mode on or o.
Press ENTER to continue
Power Saving On or O
This screen shows the Total Distance exercised in miles
or kilometers.
Press ENTER to continue
Total Distance
0 000
This screen shows Total Hours of use.
Press ENTER to continue
Total Hours
0 000
Roller Size is displayed. (Do not modify)
Press ENTER to continue
Roller
600
Press LEVEL +/- to turn Calendar on or o.
(Do not modify)
Press ENTER to continue
Set Calendar On or O
Press LEVEL +/- to turn Audible Beep on or o.
Press ENTER to continue
Beep On or O
!