Lighthouse ApexZ50 - Enter Preset Sample Settings

Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R6 102
Enter Preset Sample Settings.
Delay Time
Select the Delay button and enter the
delay time using the keypad and press the
green Apply button.
Sample Time
Select the Sample Time button and enter
the sample time using the keypad and
press the green Apply button.
Hold Time
Select the Hold button and enter the hold
time using the keypad and press the green
Apply button.
Cycles
Select the Cycles button and enter the
number of Cycles using the keypad and
press the green Apply button.
Units
Select the Units button and select the units ft3 (cubic feet), m3 (cubic meters) or L (liters).
Volume
Select the Volume button and enter the sample volume with the keypad and press the green Apply button.
Press the Channel/Alerts button to enable channels, warnings and alarms.
Preset Sample Settings