Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R6 74
Output
The Output screen allows the user to adjust output settings and data formatting for USB, Print, CIFS in addition
to Save and Load Configuration.
USB
Press the USB button to display the Data Output
and Formatting.
File Format
Set the file format to .csv, .lsdx or .pdf.
Data and reports output to USB will be saved in
the selected format.
On Sample (.csv format only)
Enable Output “On Sample” and output will
initiate after every sample.
On Alarm (.csv format only)
Enable Output “On Alarm” and output will initiate after every alarm is exceeded.
Raw / Norm (Normalized)
Select either Raw data counts, Normalized data counts. If you select Norm you will be prompted to select
normalize units either cubic feet, cubic meters or Liters.
Print
On Sample
Enable Output “On Sample” and output will print
after every sample is completed.
Average
Enable Average to print the average counts of all
cycles at a given location after all cycles have
completed.
On Alarm
Enable Output “On Alarm” and output will print
after every alarm is exceeded.
Reverse
Select Reverse and printing will print from the bottom up.
Font Size
Select Large or Small font size for print output.
Instrument Options: Output
Instrument Options Output
To Next Page
Loading...