Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R6 139
Service
From the Settings screen press the Service button to view the Maintenance, About and Service Logon tabs.
Maintenance
Press the Maintenance button to display the Firmware, Reset and Calibration functions.
Firmware Update
Insert a USB key with updated firmware
into the ApexZ USB port.
Press the Update Firmware button to
display the Firmware Update
confirmation screen.
Press the green check button to confirm and update the firmware on the
ApexZ from the USB key.
Or press the red x button to cancel.
Service: Maintenance Screen
To Next Page
Loading...