Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R6 78
Load ApexZ configuration file from a USB key
Place a USB key with the desired configuration file in
the ApexZ USB drive and press the Load button.
The Select File screen will display next.
Select your configuration file to load and it will highlight blue.
Press the Save button to load the selected configuration.
Press the green check button to import configuration.
Or press the red x button to cancel with no import.
WARNING: Importing a configuration will remove
the current configuration, and you will be taken
back to the home screen.
Select Configuration File to Load
Confirm to load configuration
To Next Page
Loading...