Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R6 141
Factory Reset
Pressing Factory Reset will DELETE all data on
the ApexZ and return the instrument’s
configuration to it’s original factory default
configuration. There is no data recovery after a
Factory Reset. All user created data will be
deleted.
Press the Factory Reset button to prepare to
reset to factory settings.
Press the green check button to confirm factory reset
or press the red x button to cancel and NO factory reset.
Calibration Reminder
Press the Calibration Reminder button to select the time period for a reminder status warning before the
calibration due date. An orange warning will appear in the Self-Diagnostices Status display.
1 Day
1 Week
2 Weeks
1 Month
Don’t remind
Then press the green save button
to save the reminder time period.
Or press the red x button to cancel.
To Next Page
Loading...