Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R6 113
In this example “Location 0004” has been added
to the new sample plan.
Repeat the above process to add additional
locations with Manual or Preset sample settings.
Preset - Sample Settings
Preset sample settings can be assigned to
locations in a sample plan.
Press the preset button and it will
highlight blue indicating it has
been selected.
Select a location and it will highlight blue
indicating that it has been selected.
Select a preset name and it will highlight blue
indicating it has been selected.
Press the green Save button to save the selected location with the selected preset sample settings to
the new sample plan.
If a location is linked to a preset then the user will only be able to use that preset sample settings at that
location. If a location is not linked to a preset then the user can chose any preset or set up manual sample
settings. Note if the location selected already has a Preset assigned to it then only that preset name will be
listed on the preset name list. This is because a location may be assigned only 1 preset setting.
Sample Plan with the first location added
Sample Plan Assigning a Preset to a Location
To Next Page
Loading...