Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R6 23
Preset Samples
To run preset sample settings from the Home
screen press the Group/Location button to
display the Sample Settings Dashboard.
Press the Preset button and it will highlight
blue indicating that it has been selected.
All saved preset names will be displayed on
the preset name list. Select a group name and
only those locations assigned to that group
will display on the location list. If no groups
are selected then all locations will be
displayed.
Locations assigned to a preset will appear
with the link icon indicated that a preset is
currently assigned to that location.
Saved presets will display in the Preset
Name column.
Select a location with no linked preset and all
presets will be displayed.
Assign Preset to Location
Select a Preset button and it will highlight blue indicating it has been selected.
Save Preset to Location
Press the green Save button to assign the highlighted preset to the highlighted location.
To Next Page
Loading...