Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R6 80
Ethernet
When Ethernet is enabled, the IP Address,
Subnet and Gateway will be locked out from
editing.
Ethernet is enabled:
IP, Subnet, Gateway are LOCKED.
DHCP is enabled:
Ethernet Disabled
Disable the Ethernet and disable DHCP to
allow editing of the IP Address, Subnet and
Gateway.
Ethernet and DHCP disabled.
IP Address, Subnet, Gateway are available
to edit.
DHCP is disabled.
Connectivity: Ethernet Enabled
Connectivity: Ethernet Disabled
To Next Page
Loading...