Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R6 6
Power Safety
Start Up
Press the power button to turn on the ApexZ particle
counter.
Shut Down
To shut down press the power button once. DO NOT HOLD the power button down.
Users are not required to logout before ApexZ is shut down. If Users are enabled, shutting down the ApexZ will
logout the current user and will require a user to login when the ApexZ is next started. It is permissible to shut
down the ApexZ particle counter from any one of the user interface screens.
WARNING: Do not press and hold the Power button to shut down.
This will cause a hard reset and is not recommended.
WARNING: If the ApexZ is shut down during a sample,
that sample will not be completed or saved.
To Next Page
Loading...