Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R6 56
Filter Certification Type
Select the Include button next to the
certification Type(s) to be included in the
filter. The include button will highlight green
with a yellow check mark indicating that
certification Type is included in the data
records filter.
Press the Save button to apply the filter and
return to the Reports screen.
Filter Pass/Fail
Select the Include button next to the
Pass/Fail Type(s) to be included in the filter;
Cannot Classify, Fail or Pass.
The include button(s) will highlight green
with a yellow check mark indicating that
type is included in the Report list filter.
Press the include button a second time and
the button will change to a grey color
indicating it is not included in the data
records filter.
Press the green Save button to apply the
filters and return to the Reports Screen.
If you do not press the Save button then no new filters will be applied. If you press the red x button to
cancel then also no filters will be applied. If no Types are included then no filters will be applied and
all Reports will be displayed on the Reports screen.
Note: Press the Reset Filter button to disable all included filters.
Select Certification Type Filter
To Next Page
Loading...