00
248083336-1 Rev 3 4-1
4
Programming
General
Information
The REMOTE 3104P or 5104P can be programmed using the
MODBUS Protocol or the optional REMOTE Display. The full
MODBUS protocol is detailed in Appendix A.
This chapter contains information to program basic instrument
functions to meet your needs.
DIP Switches The DIP switches are behind the cover plate illustrated below:
Figure 4-1 Panel Covering the DIP Switches
Remove the two Phillips head screws to expose the DIP switches.
Figure 4-2 Panel Removed, Switches Exposed
To Next Page
Loading...
