Lighthouse REMOTE 3104P - Page 64

Lighthouse REMOTE 3104P, 5104P Operating Manual
A-10 248083336-1 Rev 3
Note: Particle data is
always a cumulative raw
count regardless of the
instrument’s settings.
The timestamp field indicates when the data record was recorded.
Timestamps are stored as the number of seconds since 1/1/1970, the
Unix time epoch. This value can be written directly into a C/C++
time_t data type to be used by ANSI C time functions.
30009 unsigned integer Particle Channel 1 [high]
30010 unsigned integer Particle Channel 1 [low]
30011 unsigned integer Particle Channel 2 [high]
30012 unsigned integer Particle Channel 2 [low]
30013 unsigned integer Particle Channel 3 [high]
30014 unsigned integer Particle Channel 3 [low]
30015 unsigned integer Particle Channel 4 [high]
30016 unsigned integer Particle Channel 4 [low]
30017 unsigned integer Particle Channel 5 [high]
30018 unsigned integer Particle Channel 5 [low]
30019 unsigned integer Particle Channel 6 [high]
30020 unsigned integer Particle Channel 6 [low]
30021 unsigned integer Particle Channel 7 [high]
30022 unsigned integer Particle Channel 7 [low]
30023 unsigned integer Particle Channel 8 [high]
30024 unsigned integer Particle Channel 8 [low]
...
30074 unsigned int Valid particle channels
30076 unsigned int Alarm Flags - Particle Channels
Table A-8 Data Registers
Register Data Type Description