Lighthouse REMOTE 3104P - Page 79

Index
248083336-1 Rev 3 I-3
Local Control 4-8
M
MAC Address 6-2
MAC address 6-3, 6-6
Maintenance 5-1
MANUAL Counting Mode Commands 4-9
Manual Start 4-8
Manual Stop 4-8
MODBUS
Addressing 4-3
AUTOMATIC Counting Mode 4-9
Commands for Running Instrument 4-8
Instrument Run Commands 4-8
MANUAL Counting Mode 4-9
MODBUS Protocol 4-1
Configuring with 4-5
N
Netmask 6-2
Network address 3-8
Network administrator 6-3
Network Mask 6-2
Non-zero address 3-8
O
Operating Temp/RH 2-3, 2-4
Operation 3-2
Understanding LEDs 3-2
Optional 4-20mA Analog Inputs 3-4
Optional Analog Input Ports 3-11
P
PC Ethernet port 3-6
Peripheral interface connector 3-12
Personal Computer 6-3
PIConnector 3-12
Power 3-11
Power Input 2-3, 2-4
Power Switch 3-11
Preventive Maintenance 5-1
Programming 4-1
DIP Switches 4-2
R
Real Time Clock
Setting 4-6
Real-time system 3-12
Register Map A-2
Remote Control 4-8
REMOTE Display 3-12
Configuring with 4-5
Remote Display Connector 3-11
REMOTE Display Mode 4-2
Rotating data buffer 3-12
RS-232 via USB 4-5
RS-232 via USB Communications 3-9
RS-485 Communications 3-6
RS-485 converter 3-8, 4-5
RS-485 Port 4-5
RS-485 topology 3-7
Run Instrument Commands 4-8
S
Safety 1-1, 5-1
Laser safety information 1-1
Save 4-8
Saving the Settings 6-10
Sensor Settings Registers A-2
Set adapter’s IP address 6-8
Setting DIP Switches 4-2
Setting the Alarm Threshold Value A-18
Setting the Real Time Clock 4-6
Shipping instructions 3-1
Specifications
3104P 2-3
5104P 2-4
Star topology 3-7
Storage Temp/RH 2-3, 2-4
Straight-through Cat5 6-3
Straight-through Cat5 Setup 6-4
Subnet 6-2
Supported MODBUS Commands A-1