3. Slip the LT-71 with lanyard around the
neck and position the top of the micro-
phone just below the collarbone.
NOTE: Positioning of the LT-71 is critical
for proper volume adjustment.
1. Turn the 705iR power knob clockwise.
The LED above the CH A POWER
switch will ash RED one time to
indicate the power is on.
2. Turn on the LT-71 and
set the channel to
B. On the 705iR, the
GREEN IR LED above
the CH B knob will light
to indicate a signal is
being received.
4. While speaking in a normal voice,
increase the CH B volume level
until your voice is barely audible.
REMEMBER: This equipment is
designed to supplement and
distribute the user’s voice
so they are able to speak
in a conversational tone.
Having the volume set too
high will result in feedback
and listener fatigue.
To Next Page
Loading...
