Lightware 4x4DVI-DL User Manual

MX4x4DVI-DL
User’s Manual
Page 35 / 43
Change emulated EDID at one or all inputs
All EDID are enumerated in the switch EDID list. If you want to modify the current
emulated resolution you can select one from this list. There is static EDID
emulation or dynamic EDID emulation.
- Static EDID emulation means, when an EDID from memories 01..100 is
selected and emulated at input(s)
- Dynamic EDID emulation occurs, when an attached monitor’s EDID is
emulated at input(s), simply copying the data from the monitor. This EDID
changes automatically, if a new monitor is attached to the output.
1. Select the desired EDID from Switch EDID list ( from #1..100 through
DVI_IN_1 ..to DVI_IN_8)

Lightware 4x4DVI-DL Specifications

General

Brand	Lightware
Model	4x4DVI-DL
Category	Matrix Switcher
Language	English