Lightware HDMI-3D-OPT-TX210A - Page 50

7.2.3. View rmware version of the CPU
Description: View the CPU rmware revision.
Format Example
Command {f}
Response (FW:<FW_VER><s>)CrLf
 {f}
 (FW:1.0.0b0)CrLf
Legend: <FW_VER> is the rmware version. It is followed by <s> string which may indicate
special versions.
7.2.4. Connection test
Description: Simple test to see if the connection is established successfully.
Format Example
Command {PING}
Response (PONG!)CrLf
 {ping}
 (PONG!)CrLf
7.2.5. View serial number
Description: The device responds its 8-digit serial number.
Format Example
Command {s}
Response (SN:<SERIAL_N>)CrLf
 {s}
 (SN:5A003192)CrLf
7.2.6. Compile time
Description: Returns the date, when the microcontroller rmware was compiled.
Format Example
Command {CT}
Response (Complied: <DATE&TIME>)CrLf
 {ct}
 (Compiled: Jun 29 2016 16:00:11)CrLf
7.2.7. View installed board(s)
Description: Shows the hardware name and revision of the installed cards.
Format Example
Command {is}
Response (SL#●0●<MB_DESC>)CrLf
(SL●END)CrLf
 {is}
 (SL# 0 SW4-OPT-TX240RAK V11)
CrLf
 (SL END)CrLf
Explanation: The device reports its motherboard (slot 0).
7.2.8. View rmware for all controllers
Description: Shows the rmware versions of all installed controllers.
Format Example
Command {FC}
Response (CF●<DESC>)CrLf
(CF●<DESC>)CrLf
…
(CF END)CrLf
 {fc}
 (CF SW4-OPT-TX240RAK 1.0.0b0)CrLf
 (SL END)CrLf
Explanation: The device has one control panel.
Page 50 / 106 LW2 programmers' reference