MMX8x4-HT series – User's Manual 161
RS-232 Message Recognizer
ç <serial_port>
Set the Delimiter Hex
ç <delimiter>
Set the Timeout
ç <timeout>
ç
ç
ç
ç
ç
Set the Active Timeout
ç <a_timeout>
Running an Immediate Event Action
ç <event_nr>
Enable the IR Port
ç <ir_port><ir_port_staus>
ç <ir_port>.CommandInjectionPort
IR Port Messaging
ç <ir_port>:sendProntoHex(<hex_code>)
Sending Pronto Hex Codes in Big-endian Format
ç <ir_port>:sendProntoHexBigEndian(<hex_code>)
ç
ç
Set a Dynamic IP Address
ç <dhcp_status>
Set a Static IP Address
ç <IP_address>
Change the Subnet Mask (Static)
ç <netmask>
Change the Gateway Address (Static)
ç <gw_address>
Apply Network Settings
ç
Ethernet Message Sending
Sending a TCP Message (ASCII-format)
ç <IP_address>:<port_no><message>)
Sending a TCP Text (ASCII-format)
ç <IP_address>:<port_no><text>)
Sending a TCP Binary Message (HEX-format)
ç <IP_address>:<port_no><HEX_message>)
Sending UDP Message (ASCII-format)
ç <IP_address>:<port_no><message>)
Sending a UDP Text (ASCII-format)
ç <IP_address>:<port_no><text>)
Sending a UDP Binary Message (HEX-format)
ç <IP_address>:<port_no><HEX_message>)
TCP Message Recognizer
Setting the IP Address of the TCP Server
ç <loc>.ServerIP(<IP_address>)