ξ
5. Device Concept MMX8x4-HT series β User's Manual 46
ξ₯ξξξξξξξξξξξξξ
ξξξξξ
ξξξ
ξξξξξξξξξξξξ ξξ°ξ¨ξ§ξξξξξξξ
ξξξξξξξξξξ
Sending Little-endian format pronto hex codes
With Lightware Device Controller software
Step 1.
Connect the 6107 port of the matrix and ξξξξξξξξξξ°ξ¨ξ§ξξξξξξξ
ξξξ
Step 2. Choose the desired IR output in the control menu, on the infra tab.
Step 3. Copy the IR code into the Send Pronto Hexξξξξξξξξ€ξξξξξ
ξξξξξξξξξξξξξSend button.
INFO: ξ The maximum length of the code can be 765 characters (765 bytes). For more details about the
accepted IR code formats see ξ·ξξξξξξξξ΄ξξξξξξξ¬ξξξξ§ξξξξξξξξξ°ξξξξξξξξξξξ
ξξξͺξξξξ
ξξsection.
With LW3 protocol command
Step 1. Connect the 6107 port of the matrix.
Step 2. ξΉξξξξ°ξ»ξξξξξξξξξξξξξξξξ
ξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξ
Γ§ ξ§ξ₯ξ°ξ°ξξξ±ξ©ξ¨ξξ₯ξξξΆξξ¨ξξξξξξξ΄ξξξξξξ¬ξξξ<prontohex>)
INFO: ξ The maximum length of the code can be 765 characters (765 bytes). For more details about the
accepted IR code formats see ξ·ξξξξξξξξ΄ξξξξξξξ¬ξξξξ§ξξξξξξξξξ°ξξξξξξξξξξξ
ξξξͺξξξξ
ξξsection.
With Event Manager
Step 1. Connect the 6107 port of the matrix.
Step 2. Create an event in Event manager. After setting any condition, set the action:
Category: Infra; Expression: Send pronto hex; Port: D1-D6; Pronto hex: Insert the pronto hex code.
INFO: ξ The maximum length of the code can be 184 characters (184 bytes).
Sending IR code in Command Injection mode
ξ»ξξξξξξξξξξ
ξξ
ξξξξ
ξξξξξξξξξξξξξξξξ
ξξξξξξξξξξ ξξξξξξξ ξξξξξξξξξξξξξξξξξξξ
ξξξξξξξξξξξξξξξξξξξξΈξξξξξΆξξξ
ξξ
ξ
ξξξξ ξξξξξξξ ξξξξ ξξξξξ
ξξξ ξξξ ξξξ
ξξξξξξξξξ ξξξξξξξξ ξξξξ ξ°ξ₯ξ²ξ ξξξξξ ξ
ξξξ ξξξξ ξξΆξ ξξξξξξ ξ·ξξξ
ξξ
ξξξ ξξξξξξξξξ€ξξξξ
ξξξξ
ξΈξ§ξ΄ξξξ΄ξξξξξξξξξξξξξξξ
ξξξξξξ€ξξξξξξξξξξΆξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξFactory Default Settings section.
ξΈξξξξξξξξξξξξξ
ξξξξ
ξξ
ξξξ
ξξξξξξξξξξξξ°ξ¨ξ§ξξξξξξξ
ξξξξξξξξξ·ξ
ξξξξ¬ξξξξξξ
ξξξξξξξξξξ§ξξξξξξξξ©ξξξξξξξξξξξξξsection.
Port Diagram of IR Interface
ξξξξξ£Infra Interface
Summary of Infra Ports
2-pole Phoenix TRS (3.5mm Jack)
Nr. Data transmission Nr. Data transmission
ξ±ξ±ξΌξξξξξ¬ξΈξξξξ±ξ§ 2x Tx 2x Tx
ξ±ξ±ξΌξξξξξ¬ξΈξξξξ± 2x Tx 4x Tx
ξ±ξ±ξΌξξξξξ¬ξ¨ξ±ξξξξ―ξξ₯ 2x Tx 2x Tx
ξ±ξ±ξΌξξξξξ¬ξ¨ξ±ξξξξ―ξξ₯ξξΉξ·ξ¦ξξ 2x Tx 2x Tx
INFO: ξ The 2-pole Phoenix connector can be both infra or serial output. For infra data transmission the
destination TCP port numbers are 9001 and 9002ξξξ²ξξξξξξξξξξξξξξξξξξξξξξξξξξξ€ξξξξξξξξξξξξξξξξξξ
ξξξξξξξξξξξξξ
automatically.
ATTENTION! ξ The IR signal cannot be routed from an IR port to another IR port.
Technical background
The Infrared signal transmission is similar to the serial data communication. The matrix contains dedicated
IR output where IR code sending is possible. The matrix can receive IR signal via the Control Ethernet port.
The Infrared signal is in pronto hex format.
Getting IR codes
Getting IR code is possible from two sources:
βͺ Download a code which belongs to your controlled device from a web database from the Internet. The
downloaded codes are mostly in little-endian format.
βͺ ξ°ξξ
ξξξξξΆξξξξξξξξξξξξξξξξξξξ
ξξξξξξξξξξξ
Learn IR code
Step 1. ξ§ξξξξξξξξ
ξξ°ξξξξξξ
ξξξξξξξξξξξξξξξξξξ
ξξξξΆξξξξξξξξξξξξξξξξξξξξξξΉξ±ξΌξξΈξ΄ξ·ξξξξξξξξξξξξ
ξξξξξξξξ
ξξξξξξξξ
ξξξ
Step 2. Push the proper button of the remote control to scan the IR codes in hex format.
Step 3. Remove all the non-hexadecimal characters (e.g. spaces, h characters etc.) from the code.
INFO: ξ ξΈξξξξξξξξξξξξξξξξξξξξξξξξξξξξ
ξξξξξξξξξ
ξξ°ξξξξξξ
ξξξξξξξξξξξξ big-endian format.
Sending Big-endian format pronto hex codes
With LW3 protocol command
Step 1. Connect the 6107 port of the matrix.
Step 2. ξΉξξξξ°ξ»ξξξξξξξξξξξξξξξξ
ξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξξ
Γ§ ξ§ξ₯ξ°ξ°ξξξ±ξ©ξ¨ξξ₯ξξξΆξξ¨ξξξξξξξ΄ξξξξξξ¬ξξξ¦ξξξ©ξξξξ
ξξ<prontohex>)
INFO: ξ The maximum length of the code can be 765 characters (765 bytes). For more details about the
accepted IR code formats see Sending Pronto Hex Codes in Big-endian Format section.