Lightware UMX-TPS-TX130

UMX-TPS-TX120, -TX130, -TX140, -TX140K, -TX140-Plus
FP-UMX-TPS-TX120, -TX130
WP-UMX-TPS-TX120-US Black, White
WP-UMX-TPS-TX130-US Black, White
WP-UMX-TPS-TX130-Plus-US Black, White
HDBaseT
TM
Multimedia Extender
User’s Manual
 v3.0  18-05-2021

Lightware UMX-TPS-TX130 Specifications

General

Product Category	Transmitter
Output Ports	1 x HDBaseT
HDBaseT	Yes
USB	Yes
EDID Management	Yes
Input Ports	1 x HDMI, 1 x USB
Video Resolution	Up to 4K@60Hz
HDCP	HDCP 2.2
Operating Temperature	0°C to +40°C
Storage Temperature	-20 to 70 °C
Humidity	10% to 90% (non-condensing)

Summary

Important Safety Instructions

Common Safety Symbols

Explains standard safety symbols used in the manual for electrical and operational safety.

3. Installation

3.1. Mounting Options - Standalone Transmitters

Covers methods for mounting standalone transmitters, including rack shelves and under-desk kits.

3.3. Mounting Options - Wall Plates

Details how to mount transmitters into industrial standard switch/outlet boxes.

3.4. Electrical Connections

Explains the types of electrical connections supported, including DC power and specific port connectors.

3.5. Connecting Steps

Provides step-by-step instructions for connecting sources and receivers to the devices.

3.6. Powering Options

Outlines various methods for powering the devices, including local PSU and Power over Ethernet (PoE).

5. SOFTWARE CONTROL - LIGHTWARE DEVICE CONTROLLER

5.1. Install and Update

Guides users through installing and updating the Lightware Device Controller (LDC) software.

5.3. Connecting to a Device (Device Discovery Window)

Explains how to connect to devices using Ethernet, Serial, or USB interfaces via the discovery window.

5.4. Crosspoint Menu

5.7. Diagnostic Tools

Explains tools for diagnosing cable issues and system health, including Cable Diagnostics and Test Pattern.

5.10. Event Manager

Explains how to create and manage events based on conditions and actions for automated control.

5.12. Configuration Cloning (Backup Tab)

Guides on backing up and restoring device configurations for cloning settings across multiple devices.

7. LW3 PROGRAMMERS REFERENCE

7.5. Cleartext Login Protection

7.9. Event Manager Basics

Explains how to arrange events by defining conditions, actions, and linking them.

8. FIRMWARE UPDATE

8.3. Running the Software

8.4. Updating via GUI

Provides a step-by-step guide for performing firmware updates using the graphical user interface.

8.7. If the Update is not successful

9. TROUBLESHOOTING

9.1. Use Cases

Provides a table of common symptoms, root causes, actions, and referneces for troubleshooting.