IS09 ECN2087
3
Introduction
Lincat automatic fill water boilers are designed for continuous operation and should only be
switched off for the purposes of maintenance or emergency.
Accessories
The new boiler is supplied with the following components and should be verified before
installation.
• Approved flexible water connection hose.
• Pack of de-scaling compound.
• Spillage tray and grid.
• Instruction booklet.
• Guarantee card.
The EB3 model is supplied with a 3 pin bonded plug and lead fitted with a 13Amp fuse as
standard.
The EB range of boilers is surface mounted and carries the option of being wall mounted. Wall
fixing kits are an optional extra.
The EB range has a unique drainage system to allow for ease of tank evacuation during routine
de-scaling of the appliance. It is not necessary to invert the appliance during the de-scaling
procedure.
These instructions must be retained for safekeeping and for future reference.
Please read carefully all the instructions before commencing with the
installation and commissioning of the appliance.
To Next Page
Loading...
