CAUTION
In a dangerous situation, the driver can apply forced
braking by placing the operating lever in the braking
position, or by using reverse braking, depending on
the actual situation.
Using the truck on a slope
NOTE
Incorrect use of the truck on slopes is not rec-
ommended. It places particular stress on the
traction motor, brakes and battery.
Be particularly careful near slopes:
●
Never attempt a slope with a gradient great-
er than that specified in the truck's data-
sheet.
●
Make sure that the ground is dry with a non-
slip surface and that the route is clear.
Ascending slopes
Always ascend slopes travelling in the reverse
direction, with the load facing uphill.
Without a load, we recommend that you as-
cend slopes forwards.
4
Operation
Drive system
38 Operating Instructions - 1131 801 1601 EN - 12/2021 - 04
To Next Page
Loading...
