EasyManua.ls Logo

Linde MT15C - Forklift truck transport

Linde MT15C
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Forklift truck transport
Only use haulage equipment with sufficient
load capacity. (For loading and unloading
weights, see the truck model nameplate
and vehicle parameters).
The load weight is greater than the net
weight of the truck (including battery
weight). The load weight does not just in-
clude the net weight of the truck; it also in-
cludes the wooden pallet.
The pallet (or wooden box) should be large
and strong enough to withstand the weight
of the truck.
Follow the prescribed steps and park the
vehicle correctly.
Make sure the forks are aligned with the
pallet, move slowly and stop after inserting
the forks as far into the pallet as possible.
NOTE
Pay attention to the fork blades when lifting
the truck onto the pallet, to prevent injuries
caused by the fork blades trailing on the
ground.
Transport on a spacious and level surface
to avoid damaging the truck.
Be mindful of surface conditions when rais-
ing and lowering the pallet to avoid tipping
the truck.
The truck should be protected against rain.
Operation
4
Forklift truck transport
53Operating Instructions - 1131 801 1601 EN - 12/2021 - 04

Table of Contents

Related product manuals