Inspection and Maintenance
Service plan
Service plan
Note regarding servicing work
Specialist knowledge is required for servicing work. Special tools are also needed.
Contact your service dealer.
Daily inspection and servicing work.
Power supply
Visually inspect the battery.
Electrical system
Check operation switch, display equipment and component functions.
Check alarm system and safety devices.
Check the inching switch setting function.
Drive system
Check the chassis frame and apply grease. Check the position reset function of the operating
handle.
Hydraulics
Check the hydraulic functions.
Check hoses, pipes and interfaces for damage and ensure their tightness and sealing.
Additional servicing work to be performed every 500 hours or every half year.
Power supply
Check that the battery cable connections are tight and grease the battery poles if necessary.
Electrical system
Check that cables are free from damage and that the terminals are firmly attached.
Check the control unit.
Check the fastening of the cables and motor.
Drive system
Check the gearbox for abnormal sound and leakage.
Check the wheels for wear and damage.
Check the wheel bearings and their mounting.
Hydraulics
5
Maintenance
Inspection and Maintenance
62 Operating Instructions - 1131 801 1601 EN - 12/2021 - 04
To Next Page
Loading...
