Linde H35D User Manual

Operating Instructions
Diesel truck
H25D, H30D, H35D
39
3 807 1001 EN – 08/2008

Linde H35D Specifications

General

Brand	Linde
Model	H35D
Category	Trucks
Language	English

Summary

2 Safety

Safety regulations

Rules and guidelines for safe operation and maintenance.

In the case of tip-over

Actions to take and safety measures in case of a tip-over.

Determination and assessment of hazards from use of industrial trucks

Instructions before fitting attachments

4 Operation

Drive engine (two-pedal operation)

Driving (two-pedal operation)

Guidelines and warnings for driving the truck in two-pedal mode.

Drive engine (single-pedal operation)

Driving (single-pedal operation)

Guidelines and warnings for driving in single-pedal mode.

Lifting system and attachments (central lever operation)

Lifting system and attachments (single lever operation)

Lifting system and attachments with 3rd auxiliary hydraulics without toggle switch

Working under load

Procedures and safety checks for lifting and transporting loads.

Loading / Transporting

5 Maintenance

General remarks

Working on Linde lift mast and at the front of the truck

Safety measures and procedures for working on the lift mast.

Consumables recommendations

Inspection and maintenance overview

Engine

Procedures for engine oil, filter, fuel, and coolant maintenance.

Gearbox

Chassis, bodywork and fittings

Chassis frame

Electrics

Maintenance checks for electrical cables, connectors, and battery.

Hydraulics

Procedures for changing hydraulic oil and filters.

Load lift system

Maintenance for lift mast chains, forks, and sideshift systems.

Troubleshooting

Guidance for identifying and resolving common truck malfunctions.

6 Technical data

Type sheet H 25, as at 05/2008

Technical specifications for the H 25 model.

Type sheet H 30, as at 05/2008

Technical specifications for the H 30 model.

Type sheet H 35, as at 05/2008

Load diagrams and lift mast data as at 05/2008