4 Operation
Standard equipment
Setting the clock
NOTE
The time is shown in the 24 hour mode.
Change to 12 hour mode with diagnostic unit.
Please contact your authorised dealer for this
service.
¾ Depress both buttons (2) and (3) simultane-
ously for 3 seconds.
The hour readout in the time di
splay (1)blinks.
NOTE
The setting of the hours or minutes can be
adjusted slowly with button (2) by tipping it or
fast by holding it.
¾ Depress button (2) to set the hours.
¾ Depress button (3) to confirm t
he hour set-
ting.
Now the minute readout blinks.
¾ Depress button (2) to set the minutes
¾ Depress button (3) to confirm th
e setting of
the minutes.
Seat belt
Affix seat belt
DANGER
There is a risk to life if the driver
leaves the vehicle in an uncontrolled
manner.
For this reason the seat belt must
always be worn when operating the
truck! The seat belt should only be
worn by one person.
WARNING
Perfect functioning of the seat belt must be ensu-
red.
For this reason the belt should not become twisted,
trapped or tangled up. The lock and belt retractor
should be protected from foreign bodies, damage
and dirt.
30 Operating Instructions – 393 807 1001 EN – 08/2008
To Next Page
Loading...
