Maintenance 5
Inspection and maintenance overview
Inspection and maintenance overview
50 h Service plan
At operating hours
Carried
out
50
9
8
Preparations
Clean the truck (if necessary)
Read out error log and delete
Calibrate the drive potentiometer and joysticks
Enter the next maintenance interval
Engine
Drain water from the fuel filter
Chassis frame
Tighten wheel fastenings
Check the parking brake for correct operation
Electrics
Check the condition and secure positioning of electric cables, cable connectors and
connections
Hydraulics
Check the hydraulic system, drive axle, hydraulic pumps and cables for leaks (visual
inspection)
Load lift system
Lift mast, lift mast chain, lift cylinder and end stops: Check condition, secure faste-
ning and function
Adjust lift mast chain and spray with chain spray
Subsequent tasks
Carry out functional test and test drive
Attach maintenance sticker
Operating Instructions – 393 807 1001 EN – 08/2008 101
To Next Page
Loading...
