1 Introduction
Your forklift truck
Your forklift truck
offers optimum efficiency, safety, reliability
and comfort. It is now up to you to maintain
these characteristics for as long as possible
and to take advantage of the resulting benefits.
During manufacture:
• all safety requirements of the
relevant EC
directives were observed
• all conformity assessment procedures
stipulated in the applicable directives were
carried out.
This is attested by the CE mark shown on the
nameplate.
This operating manual contains
everything
you need to know about commissio
ning,
driving and maintenance.
A number of special equipment items have
their own operating manuals, which are sup-
plied along with this equipment. Please ob-
serve the information for operation depend-
ing on the version of your forklift truck and
carry out the specified work regularly, at the
due times and using the working materials
envisaged for this purpose according to the
inspection and maintenance overview pro-
gram. Please make sure you record the work
performed in the registration document for the
industrial truck; only in this manner will you
comply with the warranty conditions.
The designations used in the text: front - rear
- left - right - always refer to the installation
position of the parts described with forwards
as the direction of travel (fork arms forwards)
for the forklift truck.
In the case of servicing work n
ot described
here, specialist knowledge,
measuring instru-
ments and frequently also spe
cial tools are
required. Please ask your aut
horised dealer
to carry out this work.
Servicing should only be carried out by qual-
ified personnel approved by Linde (special-
ists).
With orders for parts, please specify the
following along with the parts numbers:
Forklift truck model:
Production number /
Year of manufacture
Handover date:
The production number should also be spec-
ified for parts from the following units: en-
gine, lift mast, hydraulic variable displacement
pump, drive axle and steering axle.
Engine number:
Lift mast number:
Lift mast stroke:
Hydraulic variable
displacement pump
number:
Drive axle number:
Steering axle
number:
When taking over the forklift truck, this data
should be copied from the rating plates of the
units into this operating manual.
NOTE
In the event of repairs, only use genuine Linde
spare parts. This is the only way to guarantee
that your forklift truck remains in the same
technical state as at the time of takeover.
Please address all queries and orders for
spare parts relating to your forklift truck only to
your authorised dealer , stating your mailing
address.
Linde is constantly engaged in the further
development of its products . We ask for
your understanding that figures/diagrams
and technical data are subject to technical
modification in terms of form, equipment and
know-how in the interest of progress.
For this reason no claims can be asserted
on the basis of the following data, figures/di-
agrams and descriptions in this operating
manual .
2 Operating Instructions – 393 807 1001 EN – 08/2008
To Next Page
Loading...
