Linde H35D - Cleaning and Greasing the Steering Axle

5 Maintenance
Chassis frame
Single fitment
23x9-10/14 PR 7.0 bar
6.50-10/14 PR 7.0 bar
6.50 R10 7.0 bar
23x9-10/20 PR 7.0 bar
23x9 R10 7.0 bar
6.50-10 SE
--
23x9-10 SE
--
H25,
H30,
H35
200/50-10 SE
--
Example
Tyre pressure sticker (1)
Drive axle
Single fitment
10.0 bar
Dual fitment
7.5 bar
Steering axle
Single fitment
7.0 bar
Cleaning and greasing the steering
axle
ENVIRONMENT NOTE
Observe information regarding working with
consumables.
When used indoors in clean, dry conditions, it
is generally sufficient to perform maintenance
every 1000 operating hours. It is advisable to
halve these lubrication intervals if the vehicle
is used both indoors and outdoors.
160 Operating Instructions – 393 807 1001 EN – 08/2008