Operation 4
Standard equipment
Lifting system and attachments (cen-
tral lever operation)
WARNING
With the moving lift mast or any
attachment thereisariskof the driver
getting caught in between.
Therefore never reach or step into
the lift mast or the space between
the lift mast and the truck. The
lifting system and attachments
should only ever be used for their
proper purpose. Drivers must be
instructed in the handling of the lifting
system and attachments. Bear the
maximum lift height in mind.
NOTE
When working with a shovel; see "forklift truck
operation using a shovel".
NOTE
With the central lever version, use of the actu-
ating lever in an intermediate position (approx.
45°) will activate both functions at the same
time (e.g. lifting and tilting).
d3931329
¾ Take note of the switching symbols with
arrows.
The actuating lever should always be operated
carefully, never jerkily. Moving the actuating
lever determines the lifting, lowering and tilt
speed. After the actuating lever is released, it
automatically returns to its initial position.
NOTE
The lifting system and attachments only func-
tion with the engine running and the driver’s
seat occupied.
Operating Instructions – 393 807 1001 EN – 08/2008 49
To Next Page
Loading...
