4 Operation
Working under load
d3921430
¾ Position the lift mast so it is vertical.
¾ Lift or lower the fork carriage to the neces-
sary height.
¾ Carefully centre the fork carria
ge and move
into the load to be taken up, where
possible
so the load touches the fork back,
taking
account of adjacent loads.
¾ Lift fork carriage until the load is no longer in
contact with the supporting surface.
¾ Check load/overloa
d indicators (special
equipment) (2) on in
dicator unit.
DANGER
If the load/overload indicator lights up red on lifting
¾ set down load immediately.
¾ Check permissible weight of load according to
load diagram.
¾ Reverse the truck until the load is free.
¾ Tilt the lift mast backwards.
Travelling with load
NOTE
When transporting cargo, the sender must
ensure that the goods are safely loaded for
transportation and secured if necessary. Ple-
ase therefore make sure that goods are pro-
perly stacked and there is no damage to pa-
ckaging, pallets etc. The carrier must ensure
safe loading.
84 Operating Instructions – 393 807 1001 EN – 08/2008
To Next Page
Loading...
