4 Operation
Special equipment
2
t3921358
¾ Press the button (2) in the front-left posi-
tion of the armrest briefly. The lamp in the
button lights up and the lift mast positioning
detection is switched on.
¾ Operate joystick and activate stored tilt an-
gle. (For safety reasons, tilting is permitted
only in the direction of the stored tilt angle,
and must be reactivated with each lift mast
positioning).
When the stored lift mast posit
ion has been
reached, the lift mast remains
stationary and
an acoustic signal is sounded i
n the indicator
unit.
¾ Release the joystick or press the button (2)
again briefly. The light in the button goes
out, and the lift mast positioning is switched
off.
¾ The lift mast can now be operated normally
using the joystick.
¾ Briefly press the button (2) aga
in. Lift mast
position detection is switch
ed on again.
Lighting
NOTE
The arrangement of the indivi
dual switches
on the right hand overhead co
nsole may vary
depending on the version. Pl
ease take note of
the symbols for the switches
.
68 Operating Instructions – 393 807 1001 EN – 08/2008
To Next Page
Loading...
