Operation 4
Standard equipment
Steering system
d3921423
Steering
The hydrostatic steering system means that
the level of effort required to turn the steering
wheel is very low. This is particularly advanta-
geous when palletising in narrow aisles.
¾ Starting and driving.
¾ Turnthesteeringwheeltotheleftandright
as far as it will go.
Apply sufficient force to move the steering
wheel beyond the limit stop making sure that
the position of the wheels on the steering axle
does not change.
DANGER
The forklift truck must not be driven if the steering
system is defective.
If the steering is stiff or has too much play, contact
your local authorised dealer.
Turning radius
H 25 2420 mm
H 30 2444 mm
H 35 2476 mm
Operating Instructions – 393 807 1001 EN – 08/2008 45
To Next Page
Loading...
