Linde H35D - Proper Usage; Symbols Used

Introduction 1
Symbols used
This operating manual must not be repro-
duced, translated or made accessible to third
parties - including as excerpts - except with the
express written approval of the manufacturer .
Proper usage
The forklift truck is intended for transporting
and stacking the loads indicated in the load
capacity diagram. We expressly draw your
attention to:
• The VDMA brochure on "Rules for proper
use of industrial trucks", supplied with these
operating instructions
• The accident prevention reg
ulations of your
employer’s liability insu
rance association
• The special measures for driving on public
roads within the scope of the StVZO (Road
Traffic Licensing Regulations)
• Other specific national regulations.
Regulations for proper use of industrial trucks
must be observed without fail by the personnel
responsible, particularly by operating and
maintenance personnel.
Before your truck is used for work not listed
in the guidelines, and which require it to be
converted or retrofitted, please contact your
authorised dealer.
No modifications, in part
icular attachment or
conversion, should be mad
etoyourforklift
truck without the manufac
turer’s approval.
The user, and not the manufacturer Linde, is
liable for any hazards caused by improper use.
Symbols used
The terms DANGER, WARNING, CAUTION,
NOTE and ENVIRONMENT NOTE are used
in these operating instructions for notes on
particular hazards or for unusual information
that needs to be highlighted:
DANGER
Means that failure to comply can cause risk to life
and/or major damage to property.
WARNING
Means that failure to comply can cause risk of
serious injury and/or major damage to property.
CAUTION
Means that failure to comply can cause risk of
material damage or destruction.
NOTE
Means that particular attention is drawn to
combinations of technical factors which may
not be evident even to a specialist.
ENVIRONMENT NOTE
The instructions listed here must be complied
with as otherwise environmental damage may
result.
CAUTION
This label is found on the truck in
the areas where particular care and
attention are required.
You should refer to the appropriate
section in these operating instruc-
tions.
For your safety, additional symbols are also
used. Please heed the various symbols.
Operating Instructions – 393 807 1001 EN – 08/2008 3