5 Maintenance
Troubleshooting
and separators for fluids running out and
grease-cutting cleaning agents.
• The processing locations must be suitable
areas with an impermeable surface. They
must be provided with collecting facilities
and separators for fluids running out and
grease-cutting cleaning agents. Suitable
storerooms for removed parts and parts
partially smeared with oil as well as for tyres,
including fire protection measures. Suitable
storage tanks for fluids such as fuel, engine
oil, hydraulic oil, coolant and fluids from air
conditioners must also be available.
• For the disposal of harmful sub
stances from
the old vehicles, the batteri
es and LPG bot-
tle/tanks must be removed. Th
e following
must also be removed, collected and stored
separately: fuel, engine oil, coolant, hy-
draulic oil, fluids from air conditioners.
• The following parts can be collected and
recycled separately: catalytic converters,
metal parts containing copper and alu-
minium, tyres, big plastic parts (console,
fluid reservoirs), glass.
NOTE
The owner is responsible for th
e compliance
with the directives and furthe
r national regula-
tions.
194 Operating Instructions – 393 807 1001 EN – 08/2008
To Next Page
Loading...
