Linear Series LS5050 - Setup Menu (Continued); Audio Setup Configuration Options; Video Setup Configuration Options; Speaker Setup Configuration Options

20
Setup Menu
(Continued)
Audio Setup Page:
Use the navigation buttons to scroll between the
menu items. Make a selection by pressing the
ENTER button. Audio Submenu Options:
• Audio Out: SPDIF/OFF, SPDIF/Raw or
SPDIF/PCM.
• Key (# to b): +4, +2, 0, -2 or -4.
Video Setup Page:
Use the navigation buttons to scroll between the
menu items. Make a selection by pressing the
ENTER button. Video Submenu Options:
• Brightness: 12, 10, 8, 6, 4, 2 or 0.
• Contrast: 12, 10, 8, 6, 4, 2 or 0.
• Hue: +6, +4, +2, 0, -2, -4 or -6.
• Saturation: 12, 10, 8, 6, 4, 2 or 0.
• Sharpness: 8, 6, 4, 2 or 0.
Speaker Setup Page:
Use the navigation buttons to scroll between the
menu items. Make a selection by pressing the
ENTER button. Speaker Submenu Options:
• Downmix: LT/RT, Stereo or VSS.
• Front: Large or Small.
Digital Setup Page:
Use the navigation buttons to scroll between the
menu items. Make a selection by pressing the
ENTER button. Digital Submenu Options:
• OP Mode: Line Out or RF Remod.
• Dynamic Range: Full, 6/8, 4/8, 2/8 or Off.
• Dual Mono: Stereo, Mono L, Mono R or Mix
Mono.
Exit Setup Menu:
Press the Setup button on the remote to exit the
setup menu.
LS5050-UM Rev. B 4/16/10 4:14 PM Page 20