Linksys BUSINESS SERIES

Chapter 6
Advanced Configuration
24
Business Internet Video Camera with Audio
Enable QoS Mode QoS (Quality of Service) mode is
disabled by default. To enable QoS mode, select this
option and select either audio or video for its guaranteed
throughput level. Enable QoS mode will automatically
enable WMM (802.11e QoS) when in wireless mode.
*WMM (Wi-Fi Multimedia) is a standard created to define
quality of service (QoS) in Wi-Fi networks. It is a precursor to
the IEEE 802.11e WLAN QoS draft standard, which is meant to
improve audio, video and voice applications transmitted over
Wi-Fi. WMM adds prioritized capabilities to Wi-Fi networks
and optimizes their performance when multiple concurring
applications, each with different latency and throughput
requirements, compete for network resources.
CoS
Enable CoS Mode CoS (Class of Service) mode is disabled
by default. To enable CoS mode, please check the check
box.
Priority Priority can be set to a value between 0 to 7. The
highest priority value is 7.
VLAN ID Enter the VLAN ID (0 to 4095) in the field
provided.
Setup > IP Filter
The Setup > IP Filter screen can be used to deny or allow a
specific IP address or range of IP addresses.
Setup > IP Filter
Options There are three options to choose from:
Disable • This option disables IP filtering function.
Enable and Deny the Following IP Address • This
function will allow you to deny access to a specific IP
address or range of IP addresses. Choose Single to
enter a specific IP address or Range to enter a range of
IP addresses. Up to 10 values can be configured.
Enable and Allow the Following IP Address • This
option will allow only the IP addresses specified here
to access the camera. Choose Single to enter a specific
IP address or Range to enter a range of IP addresses.
Up to 10 values can be configured.
Administration > Users
Administration > Users
Administrator
Admin The default administrator name cannot be
changed but the password can and should be changed
for security purposes. To change the password, enter the
desired password in the Password and Confirm Password
fields. Click the Change button to apply the change.
Demo
Viewer This account can is used to allow the viewing
of video only. By default the account name is demo and
there is no password assigned. To change the demo
account settings, modify the user name and password in
the appropriate fields and click the Change button.
User List
User ID The User ID cannot be modified.
User Name Enter the desired user name.
Password Enter the desired password in this field.
Confirm Password Retype the password in this field.