Linksys BUSINESS SERIES

Chapter 6
Advanced Configuration
26
Business Internet Video Camera with Audio
NOTE: Higher video quality settings and higher
frame rate settings require more bandwidth.
Refer to the Appendix titled “Bandwidth Usage”
for additional details.
MPEG-4 Settings
Resolution Select the desired video resolution setting.
The default resolution is set to 320x240.
Video Quality Control Choose one of the following:
Constant Bit Rate • Select the desired fix bit rate. The
default bit rate is set to 256 Kbps.
Fix Quality • Select the desired fix quality. The default
fix quality is set to Normal.
Max Frame Rate Select the desired maximum frame rate.
The default maximum frame rate is set to 30 fps.
MJPEG Settings
Resolution Select the desired video resolution format.
The default resolution is set to 320x240.
Fixed Video Quality Select the desired fix quality. The
default fix quality is set to Normal.
Frame Rate Control Select the desired frame rate. The
default frame rate is set to Auto.
Mobile Settings
Enable Mobile Streaming Enable streaming video for
the mobile devices by selecting this option.
Resolution • The default resolution is set to 160x120.
Video Quality Control • Choose from one of the
following options:
Constant Bit Rate – Select the desired fix bit rate.
The default bit rate is set to 32 Kbps.
Fix Quality – Select the desired fix quality. The
default fix quality is set to Normal.
Max Frame Rate • Select the desired maximum frame
rate. The default maximum frame rate is set to 15 fps.
Access Code • Enter a code to use to access the live video
from the Camera through cell phone connection.
Video Adjustments
Power Line Frequency Select the power line frequency
(50Hz or 60Hz) used in your region, to improve the picture
quality under fluorescent lighting.
White Balance Select the suitable white balance option
as you desired.
Brightness If necessary, you can adjust the brightness to
obtain a better image. For example, if the camera is facing
a bright light, the image may be too dark. In this case, you
can increase the brightness.
Sharpness Select the desired option for the sharpness.
You can select a sharpness value between -3 and 3.
Contrast Select the desired option for the contrast. You
can select a contrast value between -3 and 3.
Options
Enable Time Stamp If you want to display a time stamp
on the video, enable this feature by checking the check
box.
Enable Text Display If you want to display text on the
video, enable this feature by checking the check box. The
text can be up to 20 characters in length. This feature is
often used to identify the Camera location when multiple
Cameras are installed.
Enable Image Overlay If you want to display an image
on the video, enable this feature by checking the check
box.
Linksys Logo • This option will display a Linksys
logo on top of the video. Positioning of the logo is
determined by the x and y coordinates defined in the
Image Position fields. Be sure not to define a position
that is outside of the defined resolution.
User Defined Image • This option allows you to upload
a bitmap image file (smaller than 64Kb).
Image Position • The Image Position fields allow you
to define the coordinates of the Linksys logo or user
defined image. The upper left corner value is 0, 0.
Increasing the X value (X: 0 - 639) will move the image
to the right. Increasing the Y value (Y: 0 - 479) will move
the image down.
NOTE: Select values within the range of the
selected image resolution.