Linksys BUSINESS SERIES

Chapter 6
Advanced Configuration
33
Business Internet Video Camera with Audio
Status > System
Status > System
System Status
Firmware Version The version of the firmware currently
installed is displayed. Firmware can be upgraded from the
Administration > Firmware screen. You must be logged in
with administrator privileges to upgrade the firmware.
MAC Address This displays the MAC address of the
camera.
Camera Name This displays the name of the camera, as
defined on the Setup > Basic Setup screen.
Description This displays the description of the camera,
as defined on the Setup > Basic Setup screen.
Date/Time This displays the current date/time as
configured on the camera.
Status > Image
Status > Image
MPEG-4
Resolution This displays the image size of the video
stream.
Image Quality This displays the image quality of the
video stream.
Frame Rate This displays the frame rate of the video
stream.
MJPEG
Resolution This displays the image size of the video
stream.
Image Quality This displays the image quality of the
video stream.
Frame Rate This displays the frame rate of the video
stream.
Status > Network
Status > Network
Network
Network Type This displays the type of network the
camera is connected to.
IP Address This displays the IP address assigned to the
camera.
Subnet Mask This displays the subnet mask assigned to
the camera.
Gateway This displays the IP address of the gateway used
by the camera.
Primary DNS This displays the IP address of the primary
Domain Name Server used by the camera.
Secondary DNS This displays the IP address of the
secondary Domain Name Server used by the camera.
Wireless
NOTE: Wireless information is only found on
the WVC2300 camera.