Linksys LAPAC1750 User Manual

When firmware is upgraded on the master, all slaves within the same cluster will receive the
upgrade.
Clustered access points share these configurations:
•
User Accounts
•
Time Settings
•
Log Settings
•
Management Access
•
Discovery Settings
•
IGMP/MLD Snooping
•
Wireless Network
Mode
•
SSID Settings
•
Wireless Security
•
Rogue AP Detection
•
Wireless Scheduler
•
Wireless Scheduler
Association
•
Wireless Connection
Control
•
Rate Limit
•
QoS
•
Advanced Wireless
Settings
•
Captive Portal
Settings
•
Ethernet Port
Settings
•
VLAN Settings
These configurations are not shared by clustered access points:
•
IP Settings
•
WDS
•
Output Power
•
Hostname
•
Workgroup Bridge
•
Wireless Channel
•
802.1x Supplicant
73

Linksys LAPAC1750 Specifications

General

Modulation	-
Frequency band	2.412 - 2.462, 5.18 - 5.24, 5.745 - 5.825 GHz
Channels quantity	11 channels
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3at, IEEE 802.3u
Wi-Fi data rate (max)	500 Mbit/s
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1000 Mbit/s
Quality of Service (QoS) support	Yes
Internal	No
Placement	Ceiling, Wall
Certification	FCC, CE, IC
Product color	White
Cable lock slot type	Kensington
Supported network protocols	IPv6
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Security algorithms	802.1x RADIUS, WDS, WEP, WPA, WPA2
Number of SSID supported	16
Antenna features	Integrated antenna
Input current	1.5 A
AC input voltage	12 V
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	243.08 mm
Width	236.98 mm
Height	43.69 mm