EasyManuals Logo

Linksys LAPAC2600 User Manual

Linksys LAPAC2600
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #85 background imageLoading...
Page #85 background image
Settings & Status
Go to
Configuration > Cluster > Settings & Status
to manage the AP cluster function.
Choose a member type.
Type
DisabledDisable the cluster function.
MasterEnable the cluster function and assign the
access point to be the master.
NoteIf system detects there is one Master already
existed in the same cluster, the new access point that
likes to become master will be assigned to slave
automatically.
SlaveEnable the cluster function and assign the
access point to be the slave.
NoteWhen the cluster function is enabled, WDS and
workgroup bridge will be disabled automatically.
85

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linksys LAPAC2600 and is the answer not in the manual?

Linksys LAPAC2600 Specifications

General IconGeneral
2.4 GHzYes
Frequency band2.412 - 2.462, 5.18 - 5.24, 5.745 - 5.825 GHz
Channels quantity13 channels
Number of VLAN IDs17
Fit AP mode featuresWireless distribution system (WDS)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r, IEEE 802.1x, IEEE 802.3at
Receiver sensitivity802.11b 11Mbps: -85dBm 802.11a/g 54Mbps: -73dBm 802.11n HT20 MCS7: -67dBm 802.11n HT40 MCS7: -65dBm 802.11n HT40 MCS7: -65dBm
Virtual LAN featuresSSID-based VLAN assignment
Wi-Fi data rate (max)1733 Mbit/s
Ethernet LAN data rates1000 Mbit/s
Maximum data transfer rate2533 Mbit/s
Output current2.5 A
Output voltage12 V
Power consumption (max)25 W
InternalNo
PlacementCeiling, Wall
CertificationFCC: 47 CFR FCC Part 15, Subpart B, Class B; 47 CFR FCC Part 15, Subpart C; 47 CFR FCC Part 15, Subpart E CE: EN55022, Class B; EN61000-3-2; EN61000-3-3; 55024; EN 301 489-1 / EN 301 489-17, Class B; EN 300 328; EN 301 893; EN 62311; EN 50385
Product colorWhite
LED indicatorsSystem
Cable lock slot typeKensington
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports2
Antenna featuresIntegrated antenna
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)10 - 85 %
Security algorithms802.1x RADIUS, HTTPS, SNMP, WPA, WPA2
Number of SSID supported16
Service Set Identifier (SSID) featuresHidden SSID
Cables includedLAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth243 mm
Width237 mm
Height43.69 mm
Weight848 g

Related product manuals