Linksys MAX-STREAM User Manual

16
Troubleshooting
You can find more help from our award-winning customer support at linksys.com/support/EA9300.
Your router was not successfully set up
If Linksys Smart Wi-Fi did not complete the setup, you can try the following:
•
Press and hold the Reset button on your router with a paperclip or pin until the illuminated
Linksys logo turns off and the blue MU-MIMO indicators start blinking (about 10 seconds).
Install the router again.
•
Temporarily disable your computer’s firewall (see the security software’s instructions for
help). Install the router again.
•
If you have another computer, use that computer to install the router again.

Linksys MAX-STREAM Specifications

General

Wi-Fi Standard	802.11ac
MU-MIMO	Yes
Beamforming	Yes
Frequency Bands	2.4 GHz and 5 GHz
USB Ports	1 x USB 3.0
Processor	Dual-core
Security	WPA2
Ethernet Ports	4 x Gigabit Ethernet
Antennas	4 external antennas