Linksys PAP2T User Manual

Internet Phone Adapter with 2 Ports for Voice-over-IP
7
Chapter 3: Connecting the Phone Adapter
Placement Options
Placement Options
There are three ways to place the Phone Adapter. The first way is to place the Phone Adapter horizontally on a
flat surface. The second way is to place the Phone Adapter vertically on its stand. The third way is to mount the
Phone Adapter on a wall. The second and third options are explained in further detail below.
Stand Option
1 Line up the center of the Phone adapter’s stand with the center of the Phone Adapter’s labeled edge.
2. Place the Phone Adapter into the stand and push it until it is firmly seated in the stand.
Congratulations! The installation of the Phone Adapter is complete.
Figure 3-5: Attach the Phone
Adapter’s Stand (Optional)

Linksys PAP2T Specifications

General

Brand	Linksys
Model	PAP2T
Category	Adapter
Language	English