Internet Phone Adapter with 2 Ports for Voice-over-IP
33
Appendix C:
Appendix C: Specifications
Model PAP2T
Standards IEEE 802.3 (10BaseT), IEEE 802.3u (100BaseTX)
Ports/Buttons One 10/100 RJ-45 Network Port, Two Standard RJ-11 Phone Ports,
One Power Port, Reset
Cabling Type RJ45 Ethernet Category 5, RJ11 Standard Phone Cable
LEDs Power, Ethernet, Phone 1, Phone 2
Voice Protocol Session Initiation Protocol (SIP v2)
Voice Codecs G.711 a-law, G.711µ-Law, G.726, G.729 A, G.723.1
Ringer Equivalence 5 REN per RJ-11 port
Number
FXS Port Impedance 600 ohm terminating impedance (Configurable to match other
types of impedances)
Ring Voltage 50-60 Vrms ringing voltage
Security Features Password Protected Administration
Dimensions 101 x 101 x 15 mm
(W x H x D)
Unit Weight 0.15 kg
Power 5 V DC, 2.0 A
Certifications FCC, cUL, CE
To Next Page
Loading...
