Linksys PAP2T

Internet Phone Adapter with 2 Ports for Voice-over-IP
12
Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu
Using the Interactive Voice Response Menu
Set Network Mask (or Subnet
Mask)
121 Enter the network mask using
numbers on your telephone
keypad. Use the
* (star) key to enter a decimal
point.
To set the network mask, the DHCP feature must
be disabled. If the DHCP feature is enabled, you
will hear, “Invalid Option,” if you try to set the
network mask.
Check Static Gateway IP Address 130 — Use this command to check the current gateway IP
address of the Phone Adapter.
Set Static Gateway IP Address 131 Enter the IP address using
numbers on your telephone
keypad. Use the
* (star) key to enter a decimal
point.
To set a static gateway IP address, the DHCP
feature must be disabled. If the DHCP feature is
enabled, you will hear, “Invalid Option,” if you try to
set a static gateway IP address.
Check MAC Address 140 — Use this command to check the current MAC
address of the Phone Adapter in hexadecimal
string format.
Check Firmware Version 150 — Use this command to check the current version
number of the firmware currently installed on the
Phone Adapter.
Interactive Voice Response Menu
Action Command (press these
keys on the telephone)
Choices Description