Linksys RE3000W User Manual

Side
Power Switch European versions only.
Wi-Fi Protected Setup Button Use Wi-Fi Protected Setup to automatically and securely add
compatible wireless devices to your network. Refer to Using Wi-Fi Protected Setup on page 7.
Reset Press and hold for about five seconds to reset to factory defaults. You can also restore
the defaults from the Administration > Factory Defaults screen in the extender’s browser- based
utility.
Bottom
Ethernet (blue) Connect wired devices to your wireless network with Ethernet (network) cables.
The green light turns on when an Ethernet device is connected and active on this port. The light
blinks when the extender is sending or receiving data over the Ethernet port.
How to install the range extender
Before setup, unplug or disconnect any range extenders on the network.

Linksys RE3000W Specifications

General

Modulation	-
Frequency band	2.4 GHz
Number of users	- user(s)
Channels quantity	- channels
Maximum data transfer rate	300 Mbit/s
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Antenna features	Integrated antenna
Antennas quantity	2
Product color	White
Minimum system requirements	Internet Explorer 8 Safari 5 Chrome Firefox 8
Compatible operating systems	Windows XP SP3\\r Windows Vista SP1\\r Windows 7\\r Windows 8\\r Mac OS X Leopard 10.5.8\\r Mac Snow Leopard 10.6.1\\r Mac Lion 10.7\\r Mac Moutain Lion 10.8